|
All-in-one 3.5" LCD Monitor CCTV Camera PTZ Test Tester
The CCTV testerPRO� JE-T894 is developed for the On-Site installation and maintenance of video monitoring system. It can be used for displaying video, testing video signal, controlling PTZ, searching the PTZ device ID address, generating images, capturing data of RS485 and testing LAN cable etc. With it, you can do easy and simply on installing and maintaining the CCTV system, it also will improve work efficiency and get the labor cost down.
|
|
|
|
1, Video Test
|
2, PTZ controller
|
3, Video signal Level Test
|
4, Color bar Generator
|
 |
 |
 |
 |
|
3.5" 960(H) X 240(V) high resolution TFT LCD screen, display video input signal
|
As a controller, it possess full function to Control the PTZ camera, configure PTZ parameter: protocol, baud rate and ID address, pan/tilt speed, setup and call preset position
|
Adjust LCD Brightness, Contrast, Color saturation, Video Format and Video level testing. |
Output or receive standard color bar signal, testing monitor, cable or other equipment. |
| 5, UTP Cable test |
6, RS485 Data Monitor |
7, Address search |
8, Digital multimeter |
 |
 |
 |
 |
| Test LAN or telephone cable. the connecting condition and sequence of wires will be displayed, as well as the serial number of the cable tester kit. |
Capture the protocol from the controlling system and display the command and data. |
Search The PTZ camera ID |
Digital Multimeter performs AC/DC Voltage, AC/DC Current, Resistance, Continuity, Capacitance and Diode test, Auto/ Manual Range, Data hold, Relative measuring |
|
9, Audio Test
|
10, DC12V 1A Output
|
 |
It built-in speaker for audio test |
 |
Power the camera with DC12V(1A) power output from the tester. It is helpful for demo and testing where there is no power supply available |
|
|
|
| CCTV TesterPRO |
| Video Test |
Signal mode |
PAL/ NTSC auto adapt |
| Display |
3.5 inch digital TFT LCD, 960 X 240 resolution |
| LCD adjustment |
Brightness, Contrast, Saturation adjustable |
| Video In/ Out |
1CH BNC input & 1CH BNC output |
| Video output mode |
1.0Vp-p |
| Video Level Test |
Level Test |
Video signals measured in IRE or mV |
| PTZ Controller |
Communication |
RS232, RS422 simplex and RS485 |
| Protocol |
Compatible with more then 20 protocls such as Pelco D/P, Samsung, Panasonic, Lilin, Yaan... etc. |
| Baud Rate |
150, 300, 600,1200,2400, 4800, 9600, 18200bps
|
| Video Signal Generation |
Color bar generation |
Output one channel PAL/NTSC color bar video signal for test monitor or video cable
|
| UTP cable test |
UTP cable test |
Test UTP cable connection status and display in the screen, Read the number of the test box
|
| DC Power Output |
DC power output |
Output DC12v 1A power for the camera
|
| Audio Test |
Audio test |
Test the pickup and other audio equipments on the front-end
|
| RS485 data analyst |
Data Monitor |
Captures and analyzes the command data from controller device
|
| Power |
Power Adapter |
AC110~240V/ DC12V 2A
|
| Battery |
Built in 3.7V ,3000mAH Li-ion batteries
|
| Rechargeable |
After charging 3-4 hours, working time lasts 12 hours
|
| General |
Working Temperature |
-10 ~ +50
|
| working Humidity |
30 ~ 90%
|
| Dimension/ Weight |
176mm X 94mm X 36mm /340g
|
| Digital Multimeter |
| Counts: -6600 ~ +6600, Conversion rate: 3 times/s, Current modes for clamp meter with ZERO function |
| DC Voltage |
Rang |
Accuracy |
Resolution |
| 660mV (manual range) |
+- (0.3%+4) |
0.1mV |
| 6.6V |
1mV |
| 66V |
10mV |
| 660V |
100mV |
| AC Voltage |
Rang |
Accuracy |
Resolution |
| 660mV (manual range) |
+- (1.5%+6) |
0.1mV |
| 6.6V |
+- (0.8%+6) |
1mV |
| 66V |
10mV |
| 660V |
100mV |
| DC/ AC Current |
Rang |
Accuracy |
Resolution |
| 6.6mA |
+- (0.5%+3) |
1uA |
| 66mA |
10uA |
| 660mA |
100uA |
| 10A |
+- (1%+5) |
10mA |
| Resistance |
Rang |
Accuracy |
Resolution |
| 660? |
+- (0.8%+3) |
0.1? |
| 6.6K? |
+- (0.8%+2) |
1? |
| 66K? |
10? |
| 660K? |
100? |
| 6.6M? |
1K? |
| 66M? |
+- (1.2%+5) |
10k? |
| Continuity |
Rang |
Function |
| ))) |
Built-in buzzer will be sound, if resistance is low than 50? |
| Diode |
Resolution |
Function |
| 1mV |
Display: read approximate forward voltage of diode |
| Capacitance |
Rang |
Accuracy |
Resolution |
| 6.6nF |
+- (0.5%+20) |
1pF |
| 66nF |
+- (3.5%+8) |
10pF |
| 660nF |
100pF |
| 6.6?F |
1nF |
| 66?F |
10nF |
| 660?F |
+- (5%+8) |
100nF |
| 6.6mF |
1?f |
| 66mF |
10?F |
|
|
Video cable
|
1pc
|
| RS485 cable |
1pc |
| DC Output cable |
1pc |
| Multimeter cable |
2pcs |
| Audio cable |
1pc |
| LAN cable test |
1pc |
| Rechargeable Li-ion batteries |
1pc |
| safety belt |
1pc |
| Robber housing |
1pc |
| Tester (Model: JE-T894) |
1pc |
|
|
|
|
